SPEAKER LOADS The output jacks of Aguilar amplifiers are in parallel, so when you plug
in two cabinets you are putting them in parallel. If you "daisy-chain" the
cabinets this will also put them in parallel. The combined load of two cabinets in parallel goes like this:
Two 8 ohm cabinets combine to make 4 ohms
Two 4 ohm cabinets combine to make 2 ohms
One 8 ohm cabinet and one 4 ohm cabinet combine to make 2.67 ohms (Chances are that the 4 ohm cabinet will be louder than the 8 ohm cabinet in this combination, but this can vary depending on the cabinet design.)
.
